Boot to Qt on Embedded Android and Linux – Technology Preview 2 Released

Published Thursday August 15th, 2013 | by

We are happy to introduce the next iteration of our embedded adventure – Boot to Qt on embedded Linux and some really nice improvements on embedded Android.

As mentioned in Gunnar’s blog post in May, Boot to Qt is the project under which we have been researching and developing an embedded offering for Qt Enterprise edition. The purpose of the project has been to facilitate embedded device creation. This consists of integrated tooling for embedded development and deployment through Qt Creator and a pre-built Boot to Qt software stack for the target hardware. Sincefar, the project has introduced support for the software stack on top of embedded Android.

Introducing Embedded Linux

In Boot to Qt project we have received a lot of requests for adding support also for embedded Linux, so we have put an extra effort into making that happen. The setup on Linux is now here and looking pretty nice, using Yocto and Poky.

We’ve also set up the emulator to support Linux based Boot to Qt as well, so now you can choose to emulate the Boot to Qt software stack behavior on both Android and Linux.

Reference Devices

Here is a list of the current reference devices and which OS we have running on them:

Device OS
Google Nexus 7 – 1.2 GHz Quad-Core ARM Cortex A9, Tegra 3 GPU, 1GB RAM Android
Beagle Board xM – 1GHz ARM Cortex A8, PowerVR SGX530 GPU, 512MB RAM Android & Linux
Boundary Devices SABRE Lite (Freescale i.MX 6) – 1 GHz Quad-Core ARM Cortex A9, Vivante GC2000 GPU, 1GB RAM Android & Linux*
Emulator Android & Linux

*Due to licensing restrictions on the Yocto recipes for the i.MX 6, this is not bundled into the default installer. If you wish to use the SABRE Lite on Linux, we can help you set it up with minimal effort.

Also, please note that the reference devices above are just examples of Boot to Qt running on different hardware. Setting up Boot to Qt on other devices that run Android or Linux, should not involve much work (including all the tooling and other benefits of Boot to Qt).

1-click Deploy and Run

In this tech preview we have enabled the support for connecting directly to devices using USB. Once your device is set up, you can run your applications on device or emulator with just one click, on both Linux and Android.

This will enable you to regularly check how your changes affect your application on the device, without slowing you down.

Remote Debugging and Profiling

We have put quite some effort into getting remote debugging and profiling working, but it has proven to be a difficult task. Currently we offer debugging of your own code on the following setups:

Device QML Qt/C++
Nexus 7 Android only Android only
Beagle Board xM Android & Linux Linux only
SABRE Lite (i.MX6) Android & Linux Android & Linux
Emulator Android & Linux Linux only

Currently we support QML-profiling for all the Android and Linux devices.

For Android we have some problems with GDB on the Beagle Board and in the emulator (which keeps us from providing Qt/C++ debugging on these devices). More information can be found on the known issues page.

If you want debugging of the Qt libraries, these need to be built with debug symbols. We have not done this out of the box, as it will increase the size of the libraries, and might end up being to big for some devices.

Supported Modules

On embedded Android, the list of supported modules is the same as for the first technology preview.
On embedded Linux, we support the same modules as in Qt 5.1.

Getting Started

To get started with Boot to Qt you can request an evaluation license on the product page. Existing embedded Linux customers will get the upgrade to Boot to Qt for free via the Customer Portal.

One of the big difficulties in embedded projects is setting up the environment and devices for the first time and making applications run on the device. We have made a lot of improvements to the getting started process, and have set up a target that most of you would be able to deploy your first application to an actual embedded device in less than 3 hours (starting with an Ubuntu machine). That’s Boot to Qt.

Looking forward your feedback!

 

Did you like this? Share it:
Bookmark and Share

Posted in Embedded

7 comments to Boot to Qt on Embedded Android and Linux – Technology Preview 2 Released

Thiago says:

Hi!
Will Boot to Qt support Raspberry Pi? That would be awesome!

Sinan Tanilkan says:

Hi Thiago,

Thanks for sharing your opinion on this.

We have been considering to add the Raspberry PI as a reference device, but haven’t decided yet.

Please note that setting up new devices for Boot to Qt is a very manageable job, so i hope people don’t see the reference devices as all that is supported. The reference devices are just examples that work out of the box.

Br,
Sinan

MartinUI says:

I agree with Thiago. I launched Qt on Raspberry Pi but it was way through hell. I join the request :)

Edge says:

Will u cooperate with Ubuntu Edge using B2QT? Or release your own Android kernel phone? That will be awesome !

Gunnar Sletta says:

@Edge: yeah, that would indeed be awesome, but nothing planned, I’m afraid :)

ASim215 says:

Hello developers! This question and the project in the future will support processors RK3188? I’d like to see it on my Retina Tablet 9.7 Vido N90FHD RK3188 =)! Thank you in advance for your reply! Can I help you any way I can.)

rps says:

how awesome if PyQt can full support in Android

Commenting closed.